|30,000yen(around the Год выпуска: 1974 time)|
The belt drive type semi auto player with which the
design which devoted in the basic performance was carried out.
synchronous motor is adopted as an actuator, and the special urethane belt is
used for a belt.
Moreover, the product made from 30cm aluminum die-casting
with a sufficient balance precision is adopted as a turntable.
The static balance S character type pipe arm is adopted as a tone arm,
and the anti skating system and the lateral balancer are carried.
cartridge is adopted as the cartridge.
The shock-absorb scheme is adopted as an insulator.
The free stop type book jacket which can be
detached and attached is adopted.
In order to correspond also to 4ch
play, the low capacity connecting cord with little high region damping is
The stylus-force tick mark is minced by the counter wait part,
and it can add correctly, reading a proper stylus force.
A head shell
can be removed by International Standard 4P connector.
|Form||Belt drive player|
|<Turntable part> |
|Turntable||30cm aluminum die-casting|
|Drive system||Belt drive|
|Motor||4 pole synchronous motor|
|Rotational frequency||33 1 / 3 or 45rpm|
|Wow and flutter||0.08% or less|
|S/N ratio||40dB or more|
|<Tone arm part> |
|Tone arm||Static balance S character type pipe arm |
|Tracking error||Less than 1.5 degrees|
|<Cartridge part> |
|Cartridge||man-month type cartridge|
|Frequency characteristic||20Гц - 25кГц|
|Output balance||Less than (1кГц) 2.5dB|
|Compliance||10x10 to 6cm/dyne |
|Proper stylus force||2.0g|
|Needle point||0.6mil diamond stylus|
|An attached organization||Semi auto organization |
Anti skating system
|Размеры||Ширина 480мм, высота Год выпуска: 190мм, глубина 400мм |
|Обсудить на форуме ONKYO CP-55A